| 多针绗缝机工作原理 |
| 添加时间：2019/7/30 16:22:17 浏览次数： |
| 多针绗缝机包括相等长度的上升（下降）支撑件，该支撑独立地构造通过独立操作杆上下移动；安装在上升（下降）支撑件上的多个机针，安装在上升（下降）支撑件下的导向件，该导向件设有导向孔，承载机针的机针支撑件经过该导向孔固定在上升（下降）支撑件上。 The multi-needle quilting machine includes an equal length of up (down) support, which is independently constructed to move up and down through an independent operating rod; a plurality of needles mounted on the up (down) support are installed under the up (down) support, which is provided with a guide hole and a machine needle support for carrying the machine needle. The guide hole is fixed on the rising (falling) support. 每个支撑杆设有压脚，同时由弹簧弹性支撑。作为替换，缝被机构造成使安装在细长的纵向前，后钩基座上的多个钩分别通过钩支持件固定就位。在这种情况下，通过调节后钩基座的位置，可同时调节后钩支持件。而且，纵向杆安装在机针的前侧上方，以便根据凸轮导向件的操作在向前（向后）方向旋转一定角度。纵向杆设有与机针相同数量的挑线杆，以允许机针容纳缝被的线，该线穿过每个挑线杆，以避免任何断线 Each supporting rod is provided with a pressure foot and is supported by spring elasticity. As an alternative, the seam is made by the mechanism so that multiple hooks mounted on the slender longitudinal forward and on the back hook base are respectively fixed in place through the hook support. In this case, the rear hook support can be adjusted simultaneously by adjusting the position of the rear hook base. Moreover, the longitudinal bar is mounted on the front side of the machine needle to rotate a certain angle in the forward (backward) direction according to the operation of the cam guide. The longitudinal bar is provided with the same number of pick-up rods as the machine needle to allow the machine needle to accommodate stitched threads, which pass through each pick-up rod to avoid any breakage. |
| 上一页 绗缝机作用 |
| 下一页 超声波绗缝机的用途 |
Copyright © 技术支持：遨游网络