济宁空调维修诚信售后

伺服电脑绗缝机缝制被子的工作原理介绍

Introduction to the Working Principle of Servo Computer Quilting Machine for Quilt Sewing

     电脑绗缝机是一种以XYZ型运动的系统，X、Y轴控制绷架与机头的运动，Z轴即为主轴，控制机头的上下绗缝运动。电脑绗缝机绗缝时，在伺服电机的驱动下，通过同步带带动实现夹料框的二维运动，同时通过变频调速或其他控制系统来控制机针与旋梭的配合运动。

Computer quilting machine is a system with XYZ motion. X and Y axes control the movement of the frame and the head. Z axis is the main axis, which controls the upper and lower quilting motion of the head. When computer quilting machine quilting, driven by servo motor, the two-dimensional motion of clamping frame is realized by synchronous driving. At the same time, the coordinated motion of needle and spindle is controlled by frequency conversion speed regulation or other control system.

     伺服电脑绗缝机X与Y轴的运动主要依赖伺服电机传动，运动控制器将运动控制信号传动给电机驱动器，然后就能依据绗缝花样的要求完成高质量的同步运动。运动控制器是基于PC总线的一种高性能、高精度的伺服电机运动控制器，它包括脉冲输出、脉冲计数、数字输入、数字输出等功能，可以发出连续的高频率的脉冲串，通过改变发出脉冲的频率来控制电机的速度，改变发出脉冲的数量来控制电机的位置。

The motion of X-axis andwww.liushuicaoo.cnwww.mojufzq.cnwww.zidongment.cn www.yantaibanjia.cnwww.yantaiyanglao.cn www.feijiudianlans.cn www.gelidunmuju.com.cn Y-axis of servo computer quilting machine mainly depends on servo motor drive. Motion controller drives motion control signal to motor driver, and then can complete high-quality synchronous motion according to the requirements of quilting pattern. Motion controller is a high performance and high precision servo motor motion controller based on PC bus. It includes pulse output, pulse counting, digital input, digital output and other functions. It can send out continuous high frequency pulse train. It can control the speed of motor by changing the frequency of sending out pulse, and change the number of sending out pulse to control the position of motor.